32 SENTRY io US
6 Operation
6 Operation
6.1 Dashboard
NOTE: On some instruments, CLO2 and CO2 show as two decimal places (x.xx). The SENTRY io is limited to one decimal
place (x.x).
NOTE: Some Oxygen instruments have a calibration output signal >20mA and may display as "overrange" on the
SENTRY io.
6.1.1 Viewing Detector Details
You can view the details of any of your detectors from the dashboard. To do so, tap on the desired detector tile.
Alarm History
View the alarm history for the selected detector, including which
alarm went off and the date and time of the alarm,
acknowledgment, and reset.
To Next Page
Loading...
