Chapter
2
Installation
This chapter describes the options for mounting and installation of
WAPs, antennas, and the connection of cables. Cable termination is
beyond the scope of this manual.
Topics:
•
Pre-installation Planning
•
WAP Mounting
Important: The electronic components in a WAP are designed
to be isolated from local electrical earth. This is known as
•
Antenna Mounting Options
•
Examples of WAP Installation
Schemes
galvanic isolation and ensures there is no current passing between
grounds of different potential. In the event of a short circuit to
•
Ethernet Cable
earth, galvanic isolation prevents damage to devices in the
•
Coaxial cable
network as there are no loops for current to ow through.
Galvanic isolation must always be maintained, with antenna and
coaxial cable connections properly insulated.
Wireless Access Point User Manual15Revision B
To Next Page
Loading...