MST ImPact WAP User Manual

To enable MAC address ltering:
1.
Click on the Enable MAC Address Filter check box to view settings.
2.
Under Filter Settings, select the Mode from the drop-down box to only allow or only deny
listed machines.
3.
Click on check boxes to enable Filter Wireless Clients and/or Filter Wired Clients.
4.
Under Add MAC Address, click on the Enable check box.
5.
Enter the MAC address of client device in the MAC Address eld. Click Copy Your PC's MAC
Address to add your own computer to the list.
6.
Enter Computer Name in the supplied eld and click Save. The MAC address will appear in the
MAC Address List.
7.
To delete the device from the list, click on the icon.
8.
To edit a device in the list, click on the icon.
9.
Click Save Settings.
3.5.10 Defining VLANs
The VLAN LIST screen displays VLANs and the priority that will be assigned to trafc on each VLAN.
For more information on VLANs, see the Understanding VLANs chapter of the user manual for your
MST network switch .
Revision B52Wireless Access Point User Manual
Conguration Using the Web Interface

MST ImPact WAP Specifications

General

Brand	MST
Model	ImPact WAP
Category	Wireless Access Point
Language	English