MST ImPact WAP - Page 36

To set the time conguration settings:
1.
Select the appropriate time zone from the Time Zone drop-down box.
2.
Click Enable Daylight Saving check box if the selected region has daylight saving. Daylight saving
options will be displayed.
3.
Select the Daylight Saving Offset in the drop-down box.
4.
Select the region's DST Start date and DST End date.
5.
Click Save Settings.
To enable Automatic Time Conguration, tick the Enable NTP server checkbox, and enter an NTP
server address or select one from the dropdown menu.
Note: If an NTP server is enabled, any manual changes to the time will be overridden the next time
the device synchronises with the server. To keep a manually set time, Enable NTP Server should
be unchecked.
To Set the Date and Time Manually, select the appropriate date and time settings from the dropdown
boxes, or click Copy Your Computer's Time Settings.
Revision B36Wireless Access Point User Manual
Conguration Using the Web Interface