MST ImPact WAP User Manual

To congure wireless EAP, click on the drop-down boxes in the supplied elds. Click Save Settings to
save settings. A description of the elds and settings are described in the table below.
Recommended SettingsDescriptionField
Setting is at 120 minutes by
default.
Amount of time in minutes before
a client device is required to
re-authenticate.
Authentication Timeout
This is specic to each site.IP address of the authentication
server.
RADIUS server IP Address
By default the port number is
1812.
Port number used by the access
point to connect to the
authentication server.
RADIUS server Port
Password that matches with the
authentication server.
Password used by the access point
to access the RADIUS server.
RADIUS server Shared Secret
If selected, the user must always
use the same device when
Access to the RADIUS server by
conrmation of the client device's
MAC address.
MAC Address Authentication
connecting to the wireless
network.
A second RADIUS server can be congured if the primary server is not available or not responding. This
can be congured by clicking on the Advanced button.
Revision B48Wireless Access Point User Manual
Conguration Using the Web Interface

MST ImPact WAP Specifications

General

Brand	MST
Model	ImPact WAP
Category	Wireless Access Point
Language	English