8.6.3 Injector functions
Preconditions
☑ Engine is stopped and starting disabled.
Note: Failure to reset the drift correction parameters (CDC) and enter injector coding will render the emissions cer-
tification of the engine null and void.
Resetting drift correction parameters (CDC) with DiaSys®
Note: Document can be found on the service PC in C:\DiaSys\Doku after successful installation of DiaSys®.
1. (→ Dialog system DiaSys® E531920/..).
2. If no DiaSys® is available, contact Service.
Entering injector coding (IIG)
Note: Document can be found on the service PC in C:\DiaSys\Doku after successful installation of DiaSys®.
1. (→ Dialog system DiaSys® E531920/..).
2. If no DiaSys® is available, contact Service.
132 | Injector | MS15054/03E 2018-07
TIM-ID: 0000045425 - 003
To Next Page
Loading...
Need help?
General