8.18.2 Engine mounting – Checking condition of resilient mounts
Preconditions
☑ Engine is stopped and starting disabled.
Engine mounting – Checking the condition of resilient mounts
1. Wipe rubber surface with dry cloth, do not use organic detergents.
2. Visually inspect resilient mounts for cracking and deformation.
3. Check rubber surfaces for swelling.
4. Have cracked or swollen mounts replaced, contact Service.
MS15054/03E 2018-07 | Engine Mounting / Support | 215
TIM-ID: 0000038938 - 001
To Next Page
Loading...
Need help?
General