8.11.5 Starter – Removal
Preconditions
☑ Preparatory steps have been completed.
DANGER
Rotating, moving engine parts.
Danger of crushing, danger of body parts being drawn in or caught!
• Ensure that the engine can not be started.
• After completion of work, make sure that all protective devices are installed.
WARNING
Compressed-air pipes may still be under pressure, although the shut-off valve is closed.
Risk of injury!
• Before starting work, release pressure from pipework.
WARNING
Heavy part, risk of falling or overturning due to lack of stability.
Risk of crushing body or limbs!
• Use appropriate lifting gear and appliances.
• Wear safety shoes.
Removing starter
1. Remove pressure hose.
2. Remove starter as per overview drawing (→ Page 163).
3. Protect starter from damage.
164 | Starting Equipment | MS15054/03E 2018-07
TIM-ID: 0000006083 - 005
To Next Page
Loading...
Need help?
General