8.19 Generator
8.19.1 Generator mounting – Checking condition of resilient mounts
Preconditions
☑ Engine is stopped and starting disabled.
Generator mounting – Checking condition of resilient mounts
1. Wipe rubber surface with dry cloth, do not use organic detergents.
2. Visually inspect resilient mounts for cracks and deformation.
3. Check rubber surfaces for swelling.
4. Have cracked or swollen mounts replaced, contact Service.
216 | Generator | MS15054/03E 2018-07
TIM-ID: 0000079447 - 002
To Next Page
Loading...
Need help?
General