EasyManua.ls Logo

MTU MW15406/17E - Starting the engine from LOP (without Blue Line automation system)

MTU MW15406/17E
241 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.4 Starting the engine from LOP (without Blue Line automation
system)
Preconditions
Gearbox is in neutral position.
External start interlock is not activated.
Emergency air shut-off flaps (if fitted) are open.
DANGER
Rotating and moving engine parts.
Risk of crushing, danger of parts of the body being caught or pulled in!
Before cranking the engine with starter system, make sure that there are no persons in the en-
gine's danger zone.
WARNING
High level of engine noise when the engine is running.
Risk of damage to hearing!
Wear ear protectors.
Cranking the engine (out-of-service period > 1 month)
Item Measure
Engine Crank on starter (→ Page 147).
Starting the engine from LOP
Item Measure
Engine Start in unloaded condition.
System Switch on.
LOP:
Illuminated push button LOCAL OPERATION lights up brightly (local
control mode is active) (→ Page 105);
Illuminated push button GEARBOX NEUTRAL lights up brightly (gear-
box is disengaged) (→ Page 105).
LOP Press illuminated pushbutton READY FOR OPERATION briefly (→ Page 105).
Illuminated pushbutton READY FOR OPERATION lights up brightly.
LOP Press illuminated pushbutton START briefly (→ Page 105).
Illuminated pushbutton START of the relevant engine lights up brightly;
Automatic starting sequence is performed;
Engine speed display instrument indicates increasing speed;
After completion of the starting sequence, the engine runs at idle
speed, and the illuminated pushbutton START changes to basic bright-
ness.
MW15406/17E 2014-05 | Operation | 109
TIM-ID: 0000002241 - 003

Table of Contents

Related product manuals