EasyManua.ls Logo

MTU MW15406/17E - After stopping the engine

MTU MW15406/17E
241 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.13 After stopping the engine
Preconditions
MTU Fluids and Lubricants Specifications (A001061/..) are available.
After stopping the engine
Item Measure
Coolant circuit Drain coolant (→ Page 202) if:
freezing temperatures are expected and the engine is to remain out of
service for an extended period, but engine coolant has no antifreeze
additive;
the engine room is not heated;
the coolant is not kept at a suitable temperature;
the antifreeze concentration is insufficient for the engine-room tem-
perature;
antifreeze concentration is 50 % and engine-room temperature is be-
low -40°C.
Raw water Drain
if freezing temperatures are to be expected and the engine is to re-
main out of service for an extended period.
Engine control system Switch off.
Air intake and exhaust sys-
tem
Out-of-service-period > 1 week
Seal engine's air and exhaust sides.
Engine Out-of-service-period > 1 month
Depreserve engine (→ MTU Preservation and Represervation Specifica-
tions A001070/..)
118 | Operation | MW15406/17E 2014-05
TIM-ID: 0000002324 - 008

Table of Contents

Related product manuals