7.23.6 Engine governor – Removal and installation
Preconditions
☑Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Connector pliers
F30017884 1
Covering caps for Cannon sockets
Removing engine governor from
engine
1. Note or mark assignment of cables to con-
nector sockets.
2. Use connector pliers (2) to disengage the
bayonet union nuts (4) of the connec-
tors (3) by turning them counterclockwise.
3. Remove all connectors.
4. Close connector sockets with appropriate
covering caps (1).
220 | Task Description | MW15406/17E 2014-05
TIM-ID: 0000008487 - 005
To Next Page
Loading...
