LUBE OIL SYSTEM
Number of cylinders 8
Lube oil operating temperature before engine, from R °C 75
Lube oil operating temperature before engine, to R °C 80
Lube oil operating pressure before engine, from R bar 5.6
Lube oil operating pressure before engine, to R bar 6.1
Lube oil operating pressure, low idle (meas. point: before engine) R bar 2.0
FUEL SYSTEM
Number of cylinders 8
Fuel pressure at supply connection to engine (when engine is starting), min. L bar -0.3
Fuel pressure at supply connection to engine (when engine is running), min. L bar -0.3
Fuel pressure at supply connection to engine (when engine is starting), max. L bar +0.5
Fuel supply flow, max. R liter/min 11.9
GENERAL OPERATING DATA
Number of cylinders 8
Firing speed, from R rpm 100
Firing speed, to R rpm 120
STARTING (electric)
Number of cylinders 8
Rated starter voltage (standard design) R V= 24
INCLINATIONS, STANDARD OIL SYSTEM (relative to: waterline)
Number of cylinders 8
Longitudinal inclination continuous max. drive side down (Design: max. operat-
ing inclinations)
L degree 15
Longitudinal inclination temporary max. drive side down (Design: max. operat-
ing inclinations)
L degree 22.5
Longitudinal inclination continuous max. drive side up (Design: max. operating
inclinations)
L degree 0
Longitudinal inclination temporary max. drive side up (Design: max. operating
inclinations)
L degree 10
Transverse inclination continuous max. (Design: max. operating inclinations) L degree 22.5
Transverse inclination temporary max. (Design: max. operating inclinations) L degree 40
CAPACITIES
Number of cylinders 8
Engine oil capacity, initial filling (standard oil system) (Option: max. operating
inclinations)
R liter 65
Oil change quantity, max. (standard oil system) (Option: max. operating incli-
nations)
R liter 60
MW15406/17E 2014-05 | Technical Data | 49
TIM-ID: 0000002991 - 001
To Next Page
Loading...
