40 Part Number 9294699 12/16/15
Maintenance Section 4
Wash Blender Grate(s) / Door(s)
1. Take all grates, cup cover seals, and doors to sink to wash
and sanitize.
2. Do not put in dishwasher or power soaker.
n
Warning
When in contact with cleaning and sanitizing solution
chemicals gloves and safety glasses are recommended.
• Press the Down Arrow to continue.
Reinstall Blender Door(s)
1. Reinstall blender door(s).
• Press the Down Arrow. The Slide Progress screen will display
and the blender(s) will move into operating position.
Reinstall Blender Grate(s)
1. Reinstall blender grate(s) and cup cover(s).
• Press the Down Arrow.
Blender Wash
1. Place blue cleaning cup with wash solution in blend
chamber(s) and close the blender door(s).
• Use approved mild dish detergent solution.
2. Press the Green Check to begin.
The blenders will lower into the wash solution and spin to
clean. WASHING will display on the screen.
Follow the on screen instruction, when prompted remove
the blue cup(s) and pour wash solution down the drain.
Close the blender door(s) and RINSING will display on the
screen while the machine rinses the blenders.
FINISHED will display on the screen then progress to the
Blender Sanitizing screen.
To Next Page
Loading...
Need help?
General
