Part Number 9294699 12/16/15 43
Section 4 Maintenance
Weekly Cleaning - Zone 2
NOTE: The following procedures are the basic weekly
cleaning instructions, on-screen instructions can vary
depending on the recipe that was created with the
MenuConnect program or options chosen in the Managers
Menu. *These items are optional and may not be displayed on
all easyToUCH screens during ZONE 2 Cleaning.
• Time to complete - 90 Minutes
NOTE: An additional 1 hour 45 minutes will be needed if the
Sanitizing Ice bin option is enabled in the Managers Menu.
1. Cycle touch screen to the Main Menu and select the
Cleaning icon.
2. In the Cleaning screen select the ZONE 2 icon.
NOTE: Failure to complete the weekly cleaning sequence
entirely will not reset the weekly cleaning timer and will
require the process to be repeated.
GATHER THE FOLLOWING SUPPLIES
Follow the on-screen instructions and gather the following
supplies:
Clean towels (Cloths*)
Spray Cleaner & Detergent Solution
(Approved mild dish detergent solution)
Spray Sanitizer & Solution
Approved sanitizers:
Solution that provides 100 ppm available
chlorine minimum.
Or solution providing 300 ppm Quaternary
Ammonium minimum.
Or Manitowoc sanitizer part number
9405653, use 3.25 oz/5 gal (96 ml/19L).
Red & Blue Cleaning Cups
(1 of each per blender station)
Set of Three (3) Cleaning Buckets
(Wash, Rinse & Sanitize Solutions)
Splash Shield
Cleaning Manifold
Ice Scoop
Drain cleaner & Dispenser*
Cleaning Brush, Gloves & Safety Glasses*
* These items are optional and may not be displayed on all easyToUCH
screens.
NOTE: If other cleaners are used, it is possible they will not
clean or sanitize your machine to NSF standards.
• Press the down arrow to continue.
To Next Page
Loading...
Need help?
General
