Part Number 9294699 12/16/15 31
Section 3 Operation
PRODUCT INVENTORY SCREEN
This screen’s primary function is to provide visual product inventory information for the user. The Product Inventory screen is
normally accessed through the Main Menu.
Bag Loading
Instructions ON/OFF
Unassigned
Product Bin
Product Bin Number
Nozzle
Temperature
Product Inventory
Bar Graph
Back to Main
Menu
Days Until
Expiration
The inventory screen visually displays levels for all flavors. Underneath each flavor is the time remaining until the flavor
expires in days. NOZZLE and CABINET temperatures are also on the inventory screen. When a flavor is touched on the screen,
the instructions to replace a product bag will begin. (See “Procedure to Install a Product Bag” on page 32)
How to Access
Icon Button Descriptions
• Product Bin Number
Displays the product bin number the Product Inventory
Bar Graph represents.
• Product Inventory Bar Graph
Product inventory tracking estimates the remaining
flavoring in each product’s bag in the reach-in
compartment in 5% increments.
• Green Bar
Product inventory is above 10% and not near expiration.
• Yellow Bar
Product inventory has fallen below 10% or less than
24 hours until expiration, a message appears on the
Drink Selection screen for the affected drink(s).
• Red Bar
If the bar representing a product’s inventory level is
red, the bag is empty or expired. Replace product. (See
“Procedure to Install a Product Bag” on page 32)
• UNASSIGNED
If UNASSIGNED is displayed below the product bin
number, no product is currently assigned to the bin.
• NOZZLE Temperature
Displays the current temperature near the dispense point.
Can be set to Celsius or Fahrenheit in the Manager’s
Menu. (See “” on page 26)
• Back Arrow
Navigates to previous Main Menu screen.
• Days Until Expiration
Displays the number of days remaining until the
product bag expires. Pressing the corresponding
product bar graph will access the Replace Product
screen, displaying the steps to follow for replacement.
(See “Procedure to Install a Product Bag” on page 32)
• CABINET Temperature
Displays the current temperature in the refrigeration
cabinet. Can be set to Celsius or Fahrenheit in the Manager’s
Menu. (See “” on page 26)
• Show Instructions
= Show bag loading instructions on screen
= No instructions on screen.
Cabinet Temperature
To Next Page
Loading...
Need help?
General
