Part Number 9294699 12/16/15 5
Read This Manual
Manitowoc Beverage Systems developed this manual as a
reference guide for the owner/operator and installer of this
equipment. Please read this manual before installation or
operation of the machine. A qualified service technician must
perform installation and start-up of this equipment. Consult
Section 5 within this manual for service assistance.
If you cannot correct the service problem, call your Service
Agent or Distributor. Always have your model and serial number
available when you call.
Your Service Agent ____________________________________
Service Agent Telephone Number ________________________
Your Local Distributor __________________________________
Distributor Telephone Number __________________________
Model Number ______________________________________
Serial Number _______________________________________
Installation Date ______________________________________
About Blend-In-Cup
Class A: EMC Registration is done on this equipment for
business use only (Class A). Product seller and user should
notice that this equipment is not for household use.
The Blend-In-Cup beverage system is a self-contained dispensing
unit that allows the operator to make flavor combinations of
blended and non-blended drinks. It holds product flavoring in a
refrigerated reach-in base enclosure, has a manual fill ice bin and
includes one or two mixing modules.
The operator controls and accesses the unit using a lighted touch
screen. Icons on the drink selection screens represent the primary
flavor combinations for the drinks. There are multiple drink size
options. Menu changes and additions are uploaded using a USB
mass storage device and the Menu Connect Software platform.
On-screen instructions also include operator procedures for
cleaning/sanitizing, checking inventory, replacing product bags,
selecting drink sizes and manually preparing drinks. Managers
and technicians have access to menu/software updates,
diagnostics and other service screens.
Unit Inspection
Thoroughly inspect the unit upon delivery. Immediately report
any damage that occurred during transportation to the delivery
carrier. Request a written inspection report from a claims
inspector to document any necessary claim. See “Pre-installation
Checklist” on page 13.
n
Warning
Do not damage the refrigeration circuit when installing,
maintaining or servicing the unit.
n
Warning
Do not operate equipment that has been misused,
abused, neglected, damaged, or altered/modified from
that of original manufactured specifications.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
concerning use of the appliance by a person responsible
for their safety.
Model Numbers
This manual covers the following models:
Blend-In-Cup Beverage Systems
MA-8-2, MA-8-2BF, MA-8-2AF
Serial Number Location
The Blend-In-Cup beverage system serial number is listed on the
serial number decal affixed to the middle of the lower back panel.
Another serial number decal is located on the right side of the
machine.
Sample Serial Tag
Section 1
General Information
To Next Page
Loading...
Need help?
General
