MULTIQUIP Rammax RX1575 - Page 106

PAGE 106 — RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL S/N 3069933~ — REV. #0 (11/29/23)
MAINTENANCE
116 RAMMAX1575
3.6 Individual Operations of Maintenance
3.6.26 Cleaning the machine
• Clean the machine from major impurities after nishing
your work.
• Perform overall cleaning regularly at least once in aweek.
Blind all openings into which the cleaning agent might
penetrate (e.g. engine inlet opening) prior to pressure
water washing. Remove these blinders after washing the
machine.
Do not expose electric parts or insulation material to
direct water or steam ow. Always cover such materials
(inside of the alternator etc.).
Work with stopped engine.
Donot use aggressive and highly inammable cleaning
agents (e.g. petrol or highly inammable materials).
Follow environmental standards and regulations when
cleaning the machine!
Clean the machine in asite equipped with an intercept-
ing system for cleaning agents so that the soil and water
sources are not contaminated!
Donot use forbidden cleaning agents!