To Next PageTo Next Page
Need help?Do you have a question about the MULTIQUIP Rammax RX1575 and is the answer not in the manual?
Describes the RAMMAX 1575 trench roller's design and capabilities.
Details the intended uses and environments for the RAMMAX 1575.
Presents detailed technical specifications for the RAMMAX 1575 trench roller.
Outlines essential safety measures for operating the machine.
Lists the specific responsibilities and duties of the machine driver.
Lists prohibited actions that compromise safety and warranty.
Illustrates and explains safety decals found on the roller.
Shows and describes safety notices and signs for the remote control.
Explains the principles and examples of hand signals used for communication.
Provides procedures for preserving and storing the machine for different durations.
Identifies and describes the main components of the machine with diagrams.
Explains the display unit's operating hours counter and control lamp functions.
Details the operation, controls, and functions of the infrared remote control.
Describes the meaning and function of various indicator lamps on the transmitter.
Provides guidelines for correct handling and positioning of the remote control.
Defines protected, safe zones and maximum operating range for remote control.
Outlines the procedure for commissioning and pre-operation inspection of the machine.
Explains the purpose and use of the protective cover for the display unit.
Details the steps for starting the engine using the ignition switch.
Explains how to start the engine remotely using the control unit.
Instructions for operating the machine forward and backward.
Instructions for steering the machine to the left and right.
Explains the operation of the two gears for work and transport.
Details the controls and use of the vibration function with different amplitudes.
Provides instructions for safely shutting down the engine.
Details the procedure for parking the machine safely.
Explains how to move and transport the machine safely.
Provides instructions and safety advice for loading the machine.
Advice for operating the machine in cold weather conditions.
Explains performance impact of high temperatures and humidity.
Essential safety measures and precautions for performing machine maintenance.
Lists maintenance tasks by operating hours and service intervals.
Detailed procedures for specific maintenance tasks.
Specifies the required performance and viscosity classifications for engine oil.
Information and warnings regarding the use of biofuel (Bionafta).
Details the required coolant specifications and water quality parameters.
Specifies the required quality and types of hydraulic oil.
Provides a table summarizing fluid types, quantities, and brands for maintenance.
A table listing spare parts, their corresponding maintenance chapters, and order numbers.
General