PAGE 66 — RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL S/N 3069933~ — REV. #0 (11/29/23)
TRANSPORTING UNIT
MAX 30 %
2.8.1 Machine loading
• Use a loading ramp or crane to load the machine onto the
transport vehicle.
2.8.1.1 Loading the machine using a ramp
• When loading the machine using a ramp, all safety regula-
tions related to loading of the machine valid in the place of
loading must be adhered to. The ramp must have appropri-
ate loading capacity, antislip surface and must be stored on
a at surface. We recommend that you adhere to regulation
BGR 233.
• Maximum permissible incline of the ramp is 30 %.
Non-adherence to the prescribed parameters of the
ramp may result in damage to the machine.
Pay increased attention when loading the machine.
Improper handling can cause serious injury or death.
To Next Page
Loading...
