PAGE 112 — RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL S/N 3069933~ — REV. #0 (11/29/23)
ELECTRICAL WIRING DIAGRAM LEGEND
3.8.1 Wiring diagram
Legend:
A1 Display ACEecon
A2 Display ACEecon
A3 Sensor, ACEecon
A4 Monitoring device
A5 Control unit
B1 Horn
B2 Reversing horn
C1 Noise suppressing lter
F11-14 Fuses
F21-25 Fuses
G1 Alternator
G2 Battery
K1 Ignition relay
K2.1 Start-locking relay
K3 Time relay
K4 Pull solenoid relay
K5 Working speed relay
K6 Glowing relay
K7 Hydraulic oil cooler relay
K8 Immobilizer relay
K11 Solenoid exciter relay
M1 Starter
M2 Fuel pump
M3 Hydraulic oil cooler
N2 Display
N3 Remote control
P1 Front sensor
P2 Rear sensor
R1 Pre-heating
S1 Ignition switch
S21 Engine oil pressure sensor
S22 Coolant temperature sensor
S25 Hydraulic oil temperature sensor
Y1 Pull/holding solenoid
Y2 Working speed valve
Y3 Forward travel valve
Y4 Reverse travel valve
Y5 Left-steering valve
Y6 Right-steering valve
Y7 High-amplitude vibration valve
Y8 Low-amplitude vibration valve
Y9 Parking brake valve
Y11 Holding valve
To Next Page
Loading...
