RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL S/N 3069933~ — REV. #0 (11/29/23) — PAGE 81
MAINTENANCE
hours
1 2
3
4
5
6
7
MAINTENANCE MANUAL3.6 Individual Operations of Maintenance
Carry out lubrication and maintenance on regular basis and re-
peatedly in the intervals as per daily reading on the counter of
hours actually worked.
This Manual states only the basic information about the engine, other data are given in the Engine Operation and Maintenance Manual
which is part of the Documentation supplied with the Machine.
Follow also the instructions given in the engine operation and maintenance manual!
Tighten the removed or loosened bolts, plugs, threaded joints of the hydraulics, etc. with tightening torque according to the Chart in
par. 3.6.28 unless another value is provided with the respective operation.
Carry out maintenance with the Machine placed on at, paved surface, and secured against any self-motion, always
with the engine o, and key removed from the ignition box and with the wiring cut o (unless otherwise required).
Only carry out lubrication, maintenance and adjustment on a machine marked with “Machine in repair” tag!
Following the rst 50 hours of operation of the new Machine (following amajor overhaul) carry out as per:
3.6.15 Check of the fan and engine belt condition
3.6.16 Replacement of engine oil and lter
3.6.21 Exchanging hydraulic oil and lter
To Next Page
Loading...
