MULTIQUIP Rammax RX1575 - Lubrication and Maintenance Chart

PAGE 78 — RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL S/N 3069933~ — REV. #0 (11/29/23)
MAINTENANCE
88 RAMMAX1575
3.4 Lubrication and Maintenance Chart
Every 10 hours of operation (daily)
3.6.1 Checking fuel level
3.6.2 Engine oil level check
3.6.3 Engine cooling liquid level check
3.6.4 Hydraulic tank oil level check
3.6.5 Cleaning the hydraulic oil cooler
3.6.6 Air lter check
3.6.7 Cleaning of the water separator
3.6.8 Scrapers
3.6.9 Check the functions of the protected zone and maximum range
3.6.10 Check of drum extension tightening screws
Every 50 hours of operation
3.6.11 Inspection of brakes
3.6.12 Electrical installation check
3.6.13 Battery check
After 50 hours of operation
3.6.15 Check of the fan and engine belt condition
3.6.16 Replacement of engine oil and lter
3.6.21 Exchanging hydraulic oil and lter
Every 100 hours of operation
3.6.14 Lubricating steering cylinder, bearing
Every 250 operating hours
3.6.15 Check of the fan and engine belt condition *
3.6.16 Replacement of engine oil and lter *
3.6.17 Check of swing support
3.6.18 Check of articulation joint
Every 500 hours of operation, but at least once a year
3.6.19 Replacement of fuel lters
3.6.20 Air lter cartridge replacement