MULTIQUIP Rammax RX1575 - Hydraulic Oil; Hydraulic Oil Specification

PAGE 76 — RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL S/N 3069933~ — REV. #0 (11/29/23)
MAINTENANCE
86 RAMMAX1575
3.2 Specification of fluids
3.2.4 Hydraulic oil
2158
For use in the hydraulic system of the machine, only high-qual-
ity hydraulic oils of output class according to ISO VG 46 HVLP
(equal to DIN 51524 part 3 HVLP).
Standardly rell the machines with hydraulic oil of kinematic vis-
cosity 46 mm²/s at the temperature of 40°C (104°F) ISO VG 46.
This oil is the most suitable one to use in the broadest range of
ambient temperatures.
Synthetic hydraulic oil
Hydraulic system can be lled with synthetic oil, that is com-
pletely degradable by microorganisms found in water and soil
in case of leak. Hydraulic oil on the basis of HE ester, HEES cat-
egory according to ISO 15380, can only be used.
When changing over from mineral oil to synthetic or
when mixing oils of dierent brands, always consult the
procedure with the oil manufacturer or dealer!
3.2.5 Lubricating grease
0787
For lubrication of the machine, lubricants must be used accord-
ing to:
ISO 2137
DIN 51502