PAGE 110 — RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL S/N 3069933~ — REV. #0 (11/29/23)
MAINTENANCE
3.7 Defects
Usually, defects are caused by incorrect operation of the machine. Therefore, in case of any troubles read again properly
through the instructions given in the operation and maintenance manual for the machine and engine. If you cannot
identify the cause, contact aservice department of an authorised dealer or the manufacturer.
Troubleshooting in hydraulic and electric systems requires knowledge of these systems; therefore aservice depart-
ment of an authorised dealer or the manufacturer should be called to solve these problems.
To Next Page
Loading...
