MULTIQUIP Rammax RX1575 - Page 85

RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL S/N 3069933~ — REV. #0 (11/29/23) — PAGE 85
MAINTENANCE
95RAMMAX1575
555075A
1
MAINTENANCE MANUAL
3.6.4 Hydraulic tank oil level check
• Always check the hydraulic oil level at operating tempera-
ture with the engine running.
• Place the machine on level ground.
• Let the machine continue to idle.
• Check the oil level in the inspection window.
• The ideal oil level is when the gauge is half-full.
Topping up hydraulic oil
• Remove the screw lid (1) on the ller neck.
• Rell hydraulic oil if necessary.
• Reinstall the screw lid (1).
Important: Always grease the O-ring before screwing it
in place.
Check oil when it is cooled down.
Rell the identical type of oil to chapter 3.2.4.
Avoid leakage of oil to the soil.