Multitech MultiConnect rCell 100 Series - Pacemaker User Precautions; RF Exposure Compliance Notice; Hazardous Location Installation Warnings




UsingtheRouter’sWebInterface 15

Settingthedevice's dateandtime
Youcanconfigurehowyourroutermanagesthesettingoftimeonitsdomainofsystems.
Thesystemdateandtimedisplayintheseformats:MM/DD/YYYY/HH:MM:SS
Youcansetthedateandtimemanually.OryoucanconfiguretheroutertogetthisinformationfromanSNTP
server.
Settingthedat eandtime
Tosettherouter'sdateandtime:
1. FromSetup,selectTimeConfiguration.TheSetup:TimeConfigurationpanelopens.
2. IntheDatefield,typeinthedateyoudesire,orselectthedatefromthepop‐upcalendarthatopens
3. IntheTimefield,typethetime.
4. FromtheTi
meZo
nedrop‐downlist,selectyourtimezone.ThedefaultselectionisUTC(Universal
CoordinatedTime,UniversalTime).
Tolearnmoreabouttimezones,visitthefollowingwebsite:
http://wwp.greenwichmean
time.com/info/current‐time.htm
ConfiguringSNTPtoupdatedateandtime
ToconfiguretheserverfromwhichtheSNTPdateandtimeinformationistaken,andhowoften:
1. ToenableSNTPtoupdatethedateandtime,checkEnabled.
2. IntheServerfield,typetheSNTPservernameorIPaddressthatiscontactedtoupdatethetime.
3. InthePollingTimefield,ty
p
ethetimethatpasses,afterwhichtheSNTPclientrequeststheserverto
updatethetime.Defaultis120minutes.Youmustentertimeinminutes.
Configuringnetworksandservices
Addingnetworks
Youcandefine,editanddeletenetworksthatyourroutersupports.Thesenetworkscanlaterappearinyour
listofchoiceswhenconfiguringotheritems,suchastunnels.
Tosetupnetworks:
1. FromtheSetupgroup,selectSavedNetworks.
Alistofnetworksalreadysavedappears.
2. Add,editordeletenetworks,asdescribe
d
inthistopic.
Addingnetworks
Toaddanetwork:
1. ClickAddNetwork.
TheAddSavedNetworkdialogboxopens.
2. IntheNamefield,typethenameofthenetwork.
3. IntheIPAddressfield,typetheIPaddressofthenetwork.