Multitech MultiConnect rCell 100 Series - Administering Devices; Configuring How Routers Access the Internet; Managing Your Device from Remote Server; Setting up the Remote Server

To Next Page

To Previous Page



UsingtheRouter’sWebInterface 33



Administeringdevices

ConfiguringhowroutersaccesstheInternet 

YoumustdefinehowyourrouteraccessestheInternetandhowtheroutercanprotectthenetworksand

devicesthatithosts.

TosetuptherouterforInternetaccess:

1. Fromthenavigationpane,selectAdministration,AccessConfiguration.TheAdministration:Access

Configurationpaneopens.

2. Toconfigurethewebserver,usetheWebServergroup.The

topicConfiguringthewebserverexplains

howtoconfigurethewebserver.

3. ToconfigureSSH,usetheSSHgroup.ThetopicConfiguringSSHexplainshowtoconfigureSSH.

4. ToconfigureICMP,usetheICMPgroup.ThetopicConfiguringICMPexplainshowtoconfigureIC

MP.

5. Toallowtheroutertodefendagainstattacks,usetheIPdefensegroup.ThetopicConfiguringIPdefense

explainshowtoconfigureIPdefenseingreaterdetails.

ManagingYour DevicefromRemoteServer

Note:Thisfeatureisstillbeingdeveloped.Assuch,anticipatechangestohowdevicesareremotelymanaged.

ThisdevicecanbeconfiguredtoconnecttoaRemoteManagementServer.Itcanbemanagedandmonitored

throughMultiTech'sDeviceManagementPlatform,includingqueueingsoftwareandconfigurationupdates

forthedevice.

Toconfigureth

eRemoteManagementfeature:

1. FromAdministration,selectRemoteManagement.

2. Setuptheremoteserver.

3. Todefinewhenthedeviceconnectstotheremoteserver,defineconnectivityoptions.

4. Todefinewhenthedevicegetsorsendsupdates,defineauto‐updatesettings.

SettinguptheRemoteServer

1. ToallowthedevicetoconnecttotheRemoteManagementServer,checkthe"Enabled"box

2. Ifyouwantthedevicetouseasecureconnection,checkSSLEnabled.Thisfeaturemightbesupported

inafuturerelease.

3. TheServerNamefieldispre‐populatedwiththeaddressoftheRemoteManagementServer.

4. The

ServerPortfieldispre‐populatedwiththeporttheRemoteManagementServerlistenson.You

likelydonotneedtochangethis.

5. IntheAccountIDfieldtypetheaccountkeyreceivedfromtheMultiTechRemoteManagement

Administrator.

Thedeviceisnotallowedtoco

nnecttotheRemoteManagementServerwithoutavalidaccountkey.

Other manuals for Multitech MultiConnect rCell 100 Series