Multitech MultiConnect rCell 100 Series - Editing or Deleting an Existing Network




UsingtheRouter’sWebInterface  16

4. IntheSubnetMaskfield,typethenetworkmask.
Editingordeletinganexistingnetwork
1. Todeleteanetwork,clickDelete.
2. Atthetopofthepane,amessagetellsyouthenetworkisdeleted.Toun‐dothedelete,clicktheUndo
linkfoundinthemessage.
3. Toeditanetwork,clickEdit.ChangetheIPaddressorsubnetmaskasdesired.ClickFi
nish.
Notes:
 Youcannoteditthenetworkname.
 Youcannotdeleteanetworkifitisusedinanotherconfiguration.