MUTOH Spitfire 65 - Page 53

Operation Instructions Spitfire 65/90 Extreme
CHAPTER 5 : PREPARATIONS BEFORE PRINTING
53 AP-77140 – Rev. 1.1 – 05/04/07
3) Via the printer interface
It is also possible to print a pattern via the firmware. But this is not that precisely as with the DVD.
Please follow the steps below:
Step 1 : Go to the Dist. Adj. menu as follows.
▼
▼
▼
▼
▼
▼
▼
▼
Setup items Parameters Description
Print 1 Print the test file with intervals of ± 0.10%
Change Change the step (90.00 % - 110.00 %)
Print 2 Print the test file with intervals of ± 0.20%
Dist.Adj.
- [CANCEL] key: to shift to the previous hierarchy menu.
Step 2 : Set the step to 100.00%.