Myray hyperion X5 3D CEPH - Device Installation and Calibration; Assembly Instructions; Removal of Packaging

11
1
2
hyperion X5 3D CEPH/CEPH Ready - TECHNICAL MANUAL
EN
DEVICE INSTALLATION AND CALIBRATION » Assembly instructions
4. DEVICE INSTALLATION AND CALIBRATION
4.1 ASSEMBLY INSTRUCTIONS
Installation of the device unit must be done by qualied technicians in accordance with the mechanical and electrical
assembly instructions dened as follows. Check that the voltage indicated on the system info plate corresponds to that
of the electrical system.
REQUIRED INSTRUMENTS
4.1.1 REMOVAL OF PACKAGING