Myray hyperion X5 3D CEPH - Calibration; Tube Head Warm-Up

87
1
hyperion X5 3D CEPH/CEPH Ready - TECHNICAL MANUAL
EN
DEVICE INSTALLATION AND CALIBRATION » 2D calibration
4.6 2D CALIBRATION
REQUIRED INSTRUMENTS
Calibration kit, including:
• Support plate
• Dentition phantom
• Aluminium lter
• Laser reference sheet
• Allen wrench set
• Screwdriver set
• Pliers
4.6.1 TUBE HEAD WARM-UP
PERFORM THIS OPERATION ONLY IF THE DEVICE REMAINS UNUSED FOR MORE
THAN THREE MONTHS