29
EN
hyperion - OPERATING INSTRUCTION
CONTENTS
1 INTRODUCTION .......................................................................................................................................30
1.1 Product description ...........................................................................................................................30
1.2 Description of the manual .................................................................................................................30
1.3 Standards and Directives .................................................................................................................. 30
1.4 Overview of symbols used ................................................................................................................31
2 GENERAL SAFETY GUIDELINES ...........................................................................................................31
2.1 Intended purpose and use ................................................................................................................31
2.1.1 Installation conditions .................................................................................................................. 32
2.1.2 Operating conditions ...................................................................................................................32
2.1.3 Warranty ......................................................................................................................................32
2.1.4 Maintenance ................................................................................................................................32
2.1.5 Cleaning and disinfecting ............................................................................................................32
2.2 Safety guidelines ...............................................................................................................................34
2.2.1 Operating conditions ...................................................................................................................34
2.2.2 General safety rules .................................................................................................................... 34
2.2.3 Safety guidelines to be followed while equipment is in motion ...................................................34
2.2.4 Protection against radiation .........................................................................................................34
2.2.5 Emergency pushbutton ...............................................................................................................34
2.2.6 Exposure to laser radiation .........................................................................................................34
2.2.7 Electromagnetic safety ................................................................................................................ 34
3 DESCRIPTION OF THE APPARATUS .....................................................................................................38
3.1 Control panels ................................................................................................................................... 39
3.2 Wall-mounted control panel ..............................................................................................................41
4 INTRODUCTION TO THE SYSTEM .........................................................................................................42
4.1 General guidelines ............................................................................................................................42
4.2 Personal computer ............................................................................................................................ 42
5 PREPARING THE UNIT ............................................................................................................................42
5.1 Turning on the system .......................................................................................................................42
5.2 Selecting the exam ............................................................................................................................42
5.3a Positioning the patient for a “standard panoramic” exam ................................................................43
5.3b Positioning the patient for the “CEPH LL” examination ...................................................................45
5.4 Selecting the patient size (and technical factors) ..............................................................................46
5.5 Removing the sensor ........................................................................................................................46
5.6 Executing a dummy run ....................................................................................................................47
5.7 Taking x-rays .....................................................................................................................................47
5.8 Viewing and saving images ...............................................................................................................47
6 EXAMS AVAILABLE .................................................................................................................................48
6.1 Description of the exams ...................................................................................................................48
6.2 Positioning the patient for all the exams ...........................................................................................51
7 TECHNICAL SPECIFICATIONS ...............................................................................................................52