Nachi FD - Chapter 2 Needed Parts; Needed Parts

2.1 Needed Parts
2-1
Chapter 2 Needed Parts
2.1 Needed Parts
Optional hardware is required to use the EtherNet/IP.
Table 2.1.1 Optional hardware required for EtherNet/IP
Part name Product number
Single scanner specification AX10-OP130-A
Single adapter specification AX10-OP130-B
Scanner + Adapter AX10-OP130-C
Dual adapter specification AX10-OP130-D
EtherNet/IP board
(Field bus base board + HMS EtherNet/IP module)
Dual scanner specification AX10-OP130-E
Product numbers are as follows if you want to purchase the field bus base board and the HMS EtherNet/IP
module separately.
Table 2.1.2 Product numbers of each part
Part name Product number
Field bus base board UM236-10
HMS EtherNet/IP scanner module AB5057-B
HMS EtherNet/IP adapter module AB4173-B
The following configuration tool (prepared by the user) is necessary to use the scanner function.
・ RsNetworx for EtherNet/IP (from Rockwell)