97
Test Mode
Troubleshooting
— Must be performed by a technician —
(1) Replacing the Slide Unit
to the electronic circuits, be sure to turn off the power switch before starting work.
The slide unit and seat weigh approx. 33.1 lb. When laying down and removing
Make sure there is no one in the surrounding area.
Flange socket bolts (M6 x 30)
Under cover
Phillips Pan head screws (M5 x 25)
Seat assembly
Seat
Seat slide assembly
Slide unit
Flange socket bolts (M8 x 40)
Flange socket bolts (M8 x 40)
To Next Page
Loading...
