NAMCO MARIOKART ARCADE GP DX - Software Update


28

 Once the software update preparations have started, do not turn off the power
switch until the update is complete and the title screen appears on the monitor.




MARIOKART ARCADE GP DX PCB BOOT UP
BOOT CHECK POWER ON
UNIT MODE CHECK DRIVER UNIT
DRIVER UNIT PCB ID ２
DRIVER UNIT S/N CHECK ０１２３４５−０１２３４５
I/O CHECK ＯＫ
NAMCAM (Camera) CHECK ＯＫ
STEERING CHECK CHECKING…
LOCAL NETWORK CHECK
CERTIFICATE CHECK
UPDATE CHECK
GAME SERVER CONNECT CHECK
MK3 Rev.1.00.00/EX
PLEASE DON'T TOUCH A STEERING WHEEL
PREPARING UPDATE screen
T
２
０１２３４５−０１２３４５
ＯＫ
ＯＫ
CHECKING…
Ｒｅｖ.１.００.００/ＥＸ ⇒ Ｒｅｖ.１.０１.００/ＥＸ
PLEASE WAIT UNTIL PREPARATIONS ARE COMPLETE.
PROGRESS ９９％
PREPARING UPDATE
TO PREVENT DAMAGE TO GAME
MACHINE, DO NOT SET POWER
SWITCH TO OFF DURING UPDATE.



SOFTWARE UPDATE PREPARATION COMPLETE screen
MARIOKART ARCADE GP DX PCB BOOT UP
BOOT CHECK POWER ON
UNIT MODE CHECK DRIVER UNIT
DRIVER UNIT PCB ID ２
PLEASE DON'T TOUCH A STEERING WHEEL
MK3 Rev.1.00.00/EX
DRIVER UNIT PCB ID ２
SOFTWARE UPDATE PREPARATION COMPLETE
PRESS ITEM BUTTON TO START UPDATE
PLEASE PERFORM SOFTWARE UPDATES ON ALL UNITS
WHEN THEY ARE NOT BEING USED FOR GAME PLAY.
TO PREVENT DAMAGE TO THE GAME MACHINES
DURING UPDATES, PLEASE DO NOT SET THE POWER
SWITCH TO OFF.
Ｒｅｖ.１.００.００/ＥＸ ⇒ Ｒｅｖ.１.０１.００/ＥＸ