— Must be performed by a technician —
57
Test Mode
Troubleshooting
gap slightly larger than thickness of the bracket and then the bracket can be installed
inside the front assembly.
connector from step
.
Connector
Flat washer
(ø9 x 30 x t2.3)
Flat washer
(ø9 x 30 x t2.3)
Torx bolt
(M8 x 30)
Front assembly
Seat assembly
Torx bolt (M8 x 30)
Torx bolt (M8 x 30)
Torx bolt (M8 x 30)
Joint bracket
To Next Page
Loading...
Need help?
General
