NAMCO MARIOKART ARCADE GP DX - Page 32


29
Test Mode
Troubleshooting

 When an urgent update becomes necessary during operation, the message

on the screen, and turn the power switch off and then on again to update the
software.
 When turning the power switch off and then on again, wait 30 seconds or more
between operations to protect the electronic circuits.



STARTING SOFTWARE UPDATE screen
MARIOKART ARCADE GP DX PCB BOOT UP
BOOT CHECK POWER ON
UNIT MODE CHECK DRIVER UNIT
DRIVER UNIT PCB ID ２
DRIVER UNIT S/N CHECK ０１２３４５−０１２３４５
I/O CHECK ＯＫ
NAMCAM (Camera) CHECK ＯＫ
STEERING CHECK CHECKING…
LOCAL NETWORK CHECK
CERTIFICATE CHECK
UPDATE CHECK
GAME SERVER CONNECT CHECK
PLEASE DON'T TOUCH A STEERING WHEEL
MK3 Rev.1.00.00/EX
POWER ON
DRIVER UNIT
２
ＯＫ
TEST MODE IS CURRENTLY
INACCESSIBLE.
PLEASE WAIT FOR THE UPDATE TO START.
UPDATE WILL AUTO-RUN AFTER REBOOT.
PLEASE CHECK REVISION NUMBER ON THE TITLE SCREEN AFTER UPDATE.
STARTING SOFTWARE UPDATE
TO PREVENT DAMAGE TO GAME
MACHINE, DO NOT SET POWER
SWITCH TO OFF DURING UPDATE.
Ｒｅｖ.１.００.００/ＥＸ ⇒ Ｒｅｖ.１.００.０１/ＥＸ
Title screen
Revision No.