27
AUTO ARM
IN 1-4 HRS 0
DISPLAY
FIRE LOG Y/N
DISPLAY
OP/CL LOG Y/N
DISPLAY
SYSTEM LOG Y/N
Display Fire Log? Displays fire events in log. The User or Dealer Program Code must
be entered for this feature to appear. Use NEXT (P) and PRIOR (Q) to scroll
forward or backward through list .
Display OP/CL Log? Displays open and closing events in log. The User or Dealer Pro-
gram Code must be entered for this feature to appear. Use NEXT (P) and PRIOR
(Q) to scroll forward or backward through list .
Display System Log? Displays system events in log. The User or Dealer Program
Code must be entered for this feature to appear. Use NEXT (P) and PRIOR (Q)
to scroll forward or backward through list .
Auto Arm 1-4 hours. (Not for UL-listed systems). Your system may be set to arm
automatically at a specific time for 1 to 4 hours. To program:
• With the function “AUTO ARM 1-4 HRS“ displayed in the window, enter the desired
Arming time in hours (123 or 4), followed by
U.
The siren will sound a 2-second warning and the keypad will begin a 15-second
arming countdown with the sounder pulsing. The sounder may be silenced at this
time by pressing C, but it will turn back on with a steady warning tone 1 minute
prior to arming, at which time the building must be exited.
KEYPAD MENU MODE
To Next Page
Loading...
Need help?
General
