NAPCO GEM-K1VPS - System Trouble Error Codes (E40-E99); RF Self Test and Fire;Siren Troubles; Telemetry and Detector Troubles

45
SYSTEM TROUBLE ERROR CODES
Trouble
Indication
System Trouble
Condition
Action
E40-00
RF Self Test Failure A wireless motion sensor on the zone indicated has failed its automatic self test routine.
Call installing company for service.
E41-NN
Fire Trouble A problem has been detected on the Fire zone indicated. Call installing company for service.
E51-00
Bell/Siren Trouble There is a problem with the Bell or Siren. Call installing company for service.
E58-00
Telemetry Trouble Call installing company for service.
E59-00
Telemetry Failure Call installing company for service.
E66-00
Dirty Smoke Detector "Clean Me" indication (Smoke Detector dirty). Call installing company for service.
E99-00
Keypad Panic Shorted
too Long
Call installing company for service.