National Instruments NI cRIO-905x Series - Mounting on a DIN Rail

Mounting on a DIN Rail
What to Use
• cRIO-905x
• Screwdriver, Phillips #2
• NI DIN rail mounting kit
– 4-slot models - 157254-01
• DIN rail clip
• M4 x 10 screws (x2)
– 8-slot models - 157268-01
• DIN rail clip
• M4 x 10 screws (x3)
What to Do
Complete the following steps to mount the cRIO-905x on a standard 35-mm DIN rail.
Figure 26. Mounting the 4-slot cRIO-905x on a DIN Rail
1
2
NI cRIO-905x User Manual | © National Instruments | 31