National Instruments NI cRIO-905x Series - Microsd Card Removable Storage; Microsd Storage Accessories; Power Accessories; Power Supplies

The cRIO-905x has reverse-voltage protection.
The following NI power supplies and accessories are available for use with the cRIO-905x.
Table 5. Power Supplies
Accessory Part Number
NI PS-10 Desktop Power Supply, 24 V DC, 5 A, 100-120/200-240 V AC
Input
782698-01
NI PS-14 Industrial Power Supply, 24 to 28 V DC, 3.3 A, 100-240 V AC
Input
783167-01
NI PS-15 Industrial Power Supply, 24 to 28 V DC, 5 A, 100/230 V AC Input 781093-01
NI PS-16 Industrial Power Supply, 24 to 28 V DC, 10 A, 115/230 V AC Input 781094-01
NI PS-17 Industrial Power Supply, 24 to 28 V DC, 20 A, 85-276 V AC Input 781095-01
Table 6. Power Accessories
Accessory Part Number
2-Position Screw Terminal Power Connector for cRIO-905x (Qty 4) 786902-01
NI 9971 Backshell for 2-Position Connector Block (Qty 4) 196375-01
MicroSD Card Removable Storage
The cRIO-905x has a microSD card slot that reads from and writes to microSD cards. The slot
supports microSD card interface speeds up to UHS-I DDR50.
Notice Using microSD cards that are not approved by NI might invalidate
specifications and result in unreliable performance.
The following accessories are available for use with the cRIO-905x.
Table 7. MicroSD Storage Accessories
Accessory Capacity Part Number
Industrial microSD card, -40 °C to 85 °C, UHS-I 16 GB 786913-01
MicroSD card slot cover (x3) — 786901-01
8 | ni.com | NI cRIO-905x User Manual