NavigateWorx NR500 Series - Page 38

Industrial Cellular VPN Router NR500 Series User Manual
Page 37 / 78
Ethernet->LAN
• Interface
Select the configurate LAN port of this subnet.
• IP Address
Enter LAN IP address for this interface.
• Netmask
Enter subnet mask for this subnet.
• MTU
Maximum Transmission Unit, maximum packet size allowed to be transmitted. Should be left as
default value of 1500 in most cases.
• Enable
Check this box to enable DHCP feature on current LAN port.
• Mode
Select the DHCP working mode from “Server” or “Relay”.