NComputing M300 User Manual rev.02.21.12
Page 12 of 78
Host Setup
System Requirements
While the vSpace Server software itself can support up to 45 M300 client connections, the host
specifications required to provide an optimal user experience will vary by the number of users
connecting to a given host and the average usage habits of those users. The tables below provide an
estimated starting point from which administrators can test and, if needed, adjust the hardware
specifications of their chosen host systems. NComputing recommends you always test your
environment in advance of deployment to ensure it meets your expectations.
Recommended Host Hardware Configuration (M300)
Host
Configurations
0
Number of Users
1
1-10 10-20 20-30 30-45
(minimum or
Intel™ Core
2 Quad
Intel Core™
i7
Intel Core
i7
Intel Core i7
(32-bit OS)
4 GB 4 GB 4 GB
NA
2
6 GB 8 GB 12 GB 16 GB
0
Please see the NComputing Knowledge Base at www.ncomputing.com/kb for the latest host scaling information.
1
The number of users that your installation will support depends upon the host's configuration and your end-users’
performance expectations. Performance results are highly dependent upon the individual host hardware, memory, applications
being used, OS and network conditions within any LAN. For deployments making heavy use of multimedia playback, keep in
mind that system resource usage will vary depending on the specific media player being used. Host requirements will vary,
please test your multi-user environment before deployment.
2
32-bit operating systems are not supported with this number of users.
For additional sizing guidelines refer to the following Knowledge Base articles:
• Scaling vSpace Server Deployments
http://www.ncomputing.com/kb/vSpace-Guidelines-for-Scaling-Deployments_310.html
• Deployment Checklist
.
http://www.ncomputing.com/kb/NComputing-L-series-Deployment-Checklist_309.html
To Next Page
Loading...
Need help?
General
