NComputing M300 User Manual

NComputing M300 User Manual rev.02.21.12
Page 34 of 78
Device Setup - The “Network” Tab
The Network tab contains the device’s network communication settings, as well as a Ping Test tool. The
settings that can be configured are:
• Device Name
Used to identify the device within the vSpace Server management console
• IP Configuration
Allows the administrator to configure the terminals network settings
o DHCP (dynamically obtains settings from the network’s DHCP server)
o Static (requires manual population of the IP settings)
 IP
 Subnet Mask
 Gateway
 DNS 1
 DNS 2
• Ping Test
The Ping Test utility can help in troubleshooting network connectivity problems. For
instructions on using the Ping Test utility, simply leave the text field blank and click “Ping.”

NComputing M300 Specifications

General

Audio connections	Yes
Headphone outputs	1
Number of computers controlled	-
Certification	FCC, CE
Product color	Black, Grey
Rack mounting	No
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3
AC input frequency	50 - 60 Hz
Power consumption (typical)	6 W
Sustainability certificates	RoHS
Maximum resolution	1440 x 900 pixels