NComputing M300 - Device Information; The Device Setup Screen

NComputing M300 User Manual rev.02.21.12
Page 30 of 78
Device Information
The following information can be viewed
from the Device Information screen:
o Device name
o Device ID
o Firmware version
o Serial number
o Interface
o IP address
o Subnet mask
o Gateway
o MAC address
o IP conflict
o Link detected
The “Device Setup” Screen
The Device Setup screen holds all of the device’s configuration data, which is divided into the following
categories:
• Connection Settings (default tab)
• Manage Groups
• Login Settings
• Network
• Password
• Update
When you are finished configuring device settings, you can click “OK” to save changes and exit the Setup
screen, click “Apply” to save your changes and remain in the Setup screen, or click “Cancel” to exit the
Setup screen without saving your changes.
Note: If changes have been saved with the “Apply” button, clicking “Cancel” will not undo them.