NComputing M300 User Manual

NComputing M300 User Manual rev.02.21.12
Page 17 of 78
Online Registration
In the case of Online Registration, follow the instructions below. Otherwise skip to the section titled
“Offline Registration.” Online registration will be completed automatically if possible during software
installation. If your host system is unable to access the internet
• If you want to register your software and M-series access devices online, leave the “Register
vSpace Server software” radio button selected, and click “Next.”
• At the "Customer Data" screen, if the data fields are not already populated with the information
entered during product installation, enter the registered user's relevant information. Each field
in this window must be filled in. Once you have entered all the data, click on the "Next" button
and proceed through the additional screens that show you which devices are connected and the
current registration status (vSpace Server 6).

NComputing M300 Specifications

General

Audio connections	Yes
Headphone outputs	1
Number of computers controlled	-
Certification	FCC, CE
Product color	Black, Grey
Rack mounting	No
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3
AC input frequency	50 - 60 Hz
Power consumption (typical)	6 W
Sustainability certificates	RoHS
Maximum resolution	1440 x 900 pixels