NComputing M300 User Manual

NComputing M300 User Manual rev.02.21.12
Page 58 of 78
5.2 Session Information
In addition to the session summary, you can expand the “Sessions” section of the left navigation tree to
reveal information about individual sessions. Select these sessions to display additional information on
the sessions themselves. The Session Information screen provides the following information:
Session The session’s identifying number
Device Model
The model of device connected to this session
Activation Status The device’s activation status, which is dependent on registration
User Name The Windows User Name associated with this session
Session Start Time The date and time that the session was created
Serial Number The serial number of the device associated with this session
Firmware Version
The firmware version being used by the device associated with this session
Client IP Address The IP address of the device connected to this session
Loaded
Applications
The applications currently in use by this session

NComputing M300 Specifications

General

Audio connections	Yes
Headphone outputs	1
Number of computers controlled	-
Certification	FCC, CE
Product color	Black, Grey
Rack mounting	No
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3
AC input frequency	50 - 60 Hz
Power consumption (typical)	6 W
Sustainability certificates	RoHS
Maximum resolution	1440 x 900 pixels