NComputing M300 User Manual

NComputing M300 User Manual rev.02.21.12
Page 48 of 78
2.0 NComputing vSpace
2.1 vSpace Information
Launch the vSpace Management Console by navigating from the Windows Start button to “NComputing
vSpace,” and then click on “NC-Console.” Once the console launches, left-click on the “NComputing
vSpace” section of the left navigation tree to display information on the current vSpace build installed
on your host. The vSpace Information screen provides the following information:
Product Name
The product name of the current NComputing software installed on the host
Build Date The publish date of the vSpace build currently installed
Version
The version number of the vSpace build currently installed
Copyright vSpace Copyright information
Home Page The official NComputing website URL
Technical Support The official NComputing Technical Support URL
NC Console
Version
The version number of the vSpace Console currently in use
Available (L300 /
M300) Firmware
Indicates the current firmware version available for download from this host
Left-click on the “+” sign next to the “NComputing vSpace” section of the left navigation tree to display
the “License Information” and “System Settings” sections.

NComputing M300 Specifications

General

Audio connections	Yes
Headphone outputs	1
Number of computers controlled	-
Certification	FCC, CE
Product color	Black, Grey
Rack mounting	No
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3
AC input frequency	50 - 60 Hz
Power consumption (typical)	6 W
Sustainability certificates	RoHS
Maximum resolution	1440 x 900 pixels