NComputing M300 User Manual rev.02.21.12
Page 38 of 78
The NComputing Splash Screen
Once a client has connected to a host, it will be taken to the NComputing “Press any key to start” screen.
The client will return to this screen if a user logs out. Once a key is pressed, the Windows login interface
will be shown.
M300 Multimedia Acceleration
The M300 will display full screen streaming video and multi-media applications across multiple user
sessions and is optimized to do so using NComputing’s vSpace Server transcoding process. Windows
displaying video and multi-media applications are dynamically detected by vSpace Server and then
transcoded for transport to the M300 device using the NComputing UXP network protocol. The
detection and transcoding process can take a second or two to engage, during which time media will not
be fully accelerated. A short flicker will precede the multimedia acceleration – this is normal. You can
control whether the acceleration engages or not for non-media player applications via the NC Tray
application, located in the Windows system tray, by selecting or deselecting “Browser acceleration.”
To Next Page
Loading...